In order to automate production and accelerate transformation and upgrading, enterprises began to use automatic welding equipment to replace traditional welding. Automatic welding equipment can improve welding efficiency, achieve accurate welding for any complex workpiece, stabilize welding quality, and meet the market competition needs of enterprises. What matters should be paid attention to in the operation of automatic welding equipment for welding? Shandong automatic welding equipment manufacturer will show you.

企業進行焊接工作的環境一般都是在生產車間里，在生產線中會有其他大型設備，在自動焊接設備的周圍盡量遠離大型振動設備，以免影響到焊接精確度，清理自動焊接設備周圍的油污雜質，在所能達到的焊接范圍處加裝圍欄，以防在工作過程中有人員進入。

The environment for enterprises to carry out welding work is generally in the production workshop. There will be other large equipment in the production line. The area around the automatic welding equipment should be as far away from the large vibration equipment as possible to avoid affecting the welding accuracy. The oil and impurities around the automatic welding equipment should be cleaned up, and the welding range should be equipped with a fence to prevent personnel from entering during the work process.

在進入量產前，需要對自動焊接設備進行調試工作，操作人員根據焊縫的質量來對焊接參數進行調整，這樣經過2-3次細微調整后，自動焊接設備的焊接質量達到要求，可以投入量產。

Before mass production, the automatic welding equipment needs to be debugged. The operator adjusts the welding parameters according to the quality of the weld. After 2-3 minor adjustments, the welding quality of the automatic welding equipment meets the requirements and can be put into mass production.

焊接過程中人為因素有時候會出現誤操作，在選擇焊接參數或者進行示教操作時出現錯誤，在剛開始進行操作時選用熟練地操作人員，定期對操作人員以及技術人員進行培訓，提高自動焊接的相關技能。

In the process of welding, human factors sometimes cause misoperation, and errors occur when selecting welding parameters or conducting teaching operations. Skilled operators are selected at the beginning of the operation, and operators and technicians are trained regularly to improve the relevant skills of automatic welding.

人員在進入工作之前，佩戴好防護護具，在開始工作后需要手持示教器站在焊接范圍之外，通過示教器進行操作，當自動焊接設備出現報警信號時，需要按下急停按鈕，停止焊接工作，對設備進行檢查以及調整。

Before entering the work, the personnel shall wear protective equipment. After starting the work, they need to stand outside the welding range with a hand-held teaching device and operate through the teaching device. When the automatic welding equipment has an alarm signal, they need to press the emergency stop button to stop the welding work and check and adjust the equipment.

以上就是自動焊接設備在操作過程中需要注意的事項，自動焊接設備如果操作得當，可以提高焊接效率，穩定焊接質量，提高產品的市場競爭力。當然為了著想，您在操作前后一定要對設備進行相應的檢查，關注我們http://www.camtask.com帶您了解更多使用事項！

The above are the matters needing attention during the operation of automatic welding equipment. If the automatic welding equipment is properly operated, it can improve the welding efficiency, stabilize the welding quality and improve the market competitiveness of products. Of course, for the sake of safety, you must check the equipment before and after operation, and pay attention to us http://www.camtask.com Learn more about using!