自動焊接專機是用于自動化生產的，要求人工或者機械手上下工件，焊接工裝夾具自動將工件固定，定位，自動啟動焊接電源的電弧，自動送絲和焊槍或工件的自動移動，焊接完成后自動退回，人工或機械手取下工件，其組成主要由焊接系統、機械系統、電氣控制系統構成。那么山東焊接專機如何保養呢？

The special automatic welding machine is used for automatic production. It requires manual or manipulator to mount and lower the workpiece. The welding fixture automatically fixes and positions the workpiece, automatically starts the arc of the Welding power supply, automatically feeds wire and automatically moves the welding gun or workpiece, automatically returns after welding, and manually or manually removes the workpiece. It is mainly composed of welding system, mechanical system, and electrical control system. So how to maintain the Shandong welding machine?

1.自動焊接專機操作機中鏈條為易損件，每年少拆下檢查一次，及時處理。

1. The chain in the automatic welding machine operator is a vulnerable component, which should be removed and inspected at least once a year for timely handling.

2.各行程開關的動作靈活性、可靠性要經常檢查，以免有松動、損壞。

2. The flexibility and reliability of each travel switch should be regularly checked to avoid looseness and damage.

3.電路接頭要經常檢查，保持連接牢固，插接可靠。

3. Circuit connectors should be regularly inspected to ensure they are securely connected and reliably plugged in.

4.工作站控制器及手操器內的塵土要三個月一次用壓縮空氣吹 。

4. The dust inside the workstation controller and manual operator should be blown with compressed air every three months.

5.電器、旋鈕、開關要經常檢查，保持清潔和良好的接觸，以免誤動作。

5. Electrical appliances, knobs, and switches should be regularly inspected to maintain cleanliness and good contact to avoid misoperation.

6.各導軌、滑架、絲杠及螺母等運動部位經常檢查清理，防止塵土堆積而影響運動部位的靈活運動。

6. Regularly inspect and clean the moving parts such as guide rails, sliding frames, screws, and nuts to prevent dust accumulation from affecting the flexible movement of the moving parts.

7.各滑動導軌的結合面不允許碰撞、磨損。絲杠、齒條等關鍵運動部件要經常檢查避免磨損情況。

7. The joint surface of each sliding guide rail is not allowed to collide or wear. Key moving components such as screws and racks should be regularly inspected to avoid wear and tear.

8.自動焊接操作機各運動部位、導軌與滾輪應涂潤滑脂，閉式傳動部位應注潤滑油，以保持部件運動靈活；是對平心輪、偏心輪部件的維護，保證其緊固，確保橫臂運動平直。

8. Each moving part, guide rail, and roller of the automatic welding operator should be coated with lubricating grease, and the closed transmission part should be injected with lubricating oil to maintain flexible movement of the components; The key is to maintain the flat center wheel and eccentric wheel components, ensuring their fastening and ensuring the smooth movement of the cross arm.

自動焊接專機的日常保養八大事項相關內容就講解到這里了，希望能夠給您好的幫助，更多事項就來我們網站http://www.camtask.com進行咨詢吧！

That's all for the daily maintenance of the automatic welding machine. We hope it can be helpful to you. For more information, please come to our website http://www.camtask.com Let's consult!